[JAC064] Thrust Force Analysis of a Coreless Linear Motor

DATAFile nameSize (KB)Application NoteJAC064LSM-Coreless-e.zip953Model DataJMAG-Designer 18.1JAC064LSM-Coreless-d.zip6,090Case

[JAC064] Thrust Force Analysis of a Coreless Linear Motor

In this example, explains how to obtain the thrust variations in a coreless linear motor when it is driven with a three-phase alternating current.

• Applications: Linear Motor and Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC007] Analysis of a Spindle Motor

DATAFile nameSize (KB)Application NoteJAC007SPINDLE-e.zip555Model DataJMAG-Designer 18.1JAC007SPINDLE-d.zip10,440Case

[JAC007] Analysis of a Spindle Motor

In this example, how the Speed-Torque curve, the Torque-Current curve and the magnetic flux density distribution of a spindle motor can be obtained.

• Applications: Motor and Spindle Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)

This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…

• Applications: Induction Heating
• Module: ABAQUS2 and FQ
• Physical Phenomena: Magnetic Field, Structural, and Thermal
• Technical Themes: MBD and Multiphysics

[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)

DATAFile nameSize (KB)Application NoteJAC208IH-InductionHardening_AbaqusCSE-e.zip945Model DataJMAG-Designer 16.0Abaqus 6.14-5JAC208IH-InductionHardening_AbaqusCSE-d.zip3,028Case

[JAC244] Magnetic Field Strength Analysis at a Sensor Position

In this example, with the analysis target being a motor and the detection sensor being a TMR sensor, an example where a detection signal waveform is obtained that is based on magn…

• Applications: Sensor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC244] Magnetic Field Strength Analysis at a Sensor Position

DATAFile nameSize (KB)Application NoteJAC244SENSOR-TMR-e.zip421Model DataJMAG-Designer 17.1JAC244SENSOR-TMR-d.zip864Case

[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation

In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.

• Applications: Induction Heating
• Module: DS, FQ, and HT
• Physical Phenomena: Magnetic Field, Structural, and Thermal
• Technical Themes: Multiphysics

[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation

DATAFile nameSize (KB)Application NoteJAC218IH-Gear-ThermalStress-e.zip940Model DataJMAG-Designer 17.0JAC218IH-Gear-ThermalStress-d.zip1,079Case

[JAC255] Evaluating the N-T Curve of an IPM motor Using 3D Correction

In this example, obtains N-T curves using the correction function.

• Applications: IPM Motor and Motor
• Module: TR
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC255] Evaluating the N-T Curve of an IPM motor Using 3D Correction

DATAFile nameSize (KB)Application NoteJAC255IPM-RT-3Dcorrection-e.zip624Model DataJMAG-Designer 18.0JAC255IPM-RT-3Dcorrection-d.zip41,114Case

[JAC250] Dielectric Heating Analysis of a High-Frequency Preheater with Roller Electrodes

In this example, a use case is presented where the influence of the pitch of roller electrodes on the temperature distribution of a material (tablets) is evaluated.

• Applications: High-Frequency Preheater
• Module: EL and HT
• Technical Themes: Multiphysics

[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear

In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Multiphysics

[JAC250] Dielectric Heating Analysis of a High-Frequency Preheater with Roller Electrodes

DATAFile nameSize (KB)Application NoteJAC250HFPH-RollerElec-e.zip754Model DataJMAG-Designer 17.0JAC250HFPH-RollerElec-d.zip1,169Case

[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear

DATAFile nameSize (KB)Application NoteJAC220IH-CoolingProcess-e.zip776Model DataJMAG-Designer 17.0JAC220IH-CoolingProcess-d.zip1,302Case