LS
Iron Loss Calculation
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN -Direct Link-
In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.
-
[JAC110] Loss Analysis of a Choke Coil
This Application Note shows how to obtain the iron loss and copper loss in a choke coil.
-
[JAC165] Creating IPM Motor Efficiency Maps
In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.
-
[JAC148] Loss Analysis of a Power Transformer (Flyback Converter)
A magnetic field analysis simulation based on the finite element method (FEM) can precisely evaluate the complex loss distributions of the coil and core, so it is optimal for an a…
-
[JAC091] Iron Loss Analysis of an IPM Motor Including the Effects of Press Fitting Stress
This Application Note presents modeling the press fitting of a core and frame with the Press Fit condition and then obtaining the iron loss density of an IPM motor with and withou…
-
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
-
[JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor
This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …
-
[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress
This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.
-
[JAC029] Iron Loss Analysis of an SPM Motor with Overhanging Magnet
This Application Note presents the use of a no-load iron loss analysis of an SPM motor with and without an overhanging magnet.
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
