Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC120] Thermal Demagnetization Analysis of an SPM Motor
This Application Note presents how to change the temperature of permanent magnets in an analysis, and then evaluate the effects on the torque waveform, magnetic flux density distr…
-
[JAC074] Speed Versus Torque Analysis of a Single-Phase Induction Motor
This Application Note explains how to obtain the current density distribution and Speed-Torque curve created by auxiliary winding that uses a capacitor.
-
[JAC116] Operating Time Analysis of an Injector by Evaluating the Reduction in Eddy Currents
This Application Note explains how to apply direct current voltage to a solenoid injector and obtain its response characteristics by accounting for effects from eddy currents. The…
-
[JAC077] Inductance Analysis of an RFID Tag
This Application Note performs a magnetic field analysis of an RFID tag that has a metallic film and a magnetic sheet with a resonance frequency of 13.56 MHz, and obtains the magn…
-
[JAC109] Operating Time Analysis of an Electromagnetic Relay Accounting for Eddy Currents
This Application Note presents the use of the motion equation function to evaluate the operating time of an electromagnetic relay with DC voltage drive. Eddy currents generated in…
-
[JAC071] Basic Characteristic Analysis of a Motor with 2 Brushes, 6 Poles, and 19 Slots
This Application Note presents an analysis to obtain the speed versus torque and torque versus current for a motor that has 2 brushes, 6 poles, and 19 slots.
-
[JAC111] Starting Performance Analysis of a Universal Motor
This document introduces the use of a magnetic field analysis to obtain the speed versus time graph, the current waveform, and the torque versus time graph for a universal motor.
-
[JAC118] Thermal Analysis of a Bus Bar
This Application Note presents how to obtain the temperature distribution in a bus bar or the like with changes in the power supply frequency.
-
[JAC091] Iron Loss Analysis of an IPM Motor Including the Effects of Press Fitting Stress
This Application Note presents modeling the press fitting of a core and frame with the Press Fit condition and then obtaining the iron loss density of an IPM motor with and withou…
-
[JAC061] Current Distribution Analysis of a Choke Coil
This Application Note explains a case example that obtains the current distribution in a choke coil.
-
[JAC102] Magnetic Field Analysis of a Magnetic Sensor
This Application Note presents how to obtain the magnetic flux density distribution at points in the horizontal and vertical directions away from the magnet.
-
[JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting
This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…
-
[JAC117] Iron Loss Analysis of a Transformer
This Application Note presents how to obtain the iron loss and the ratio of hysteresis loss and joule loss within that iron loss for a three-phase transformer.
-
[JAC110] Loss Analysis of a Choke Coil
This Application Note shows how to obtain the iron loss and copper loss in a choke coil.
-
[JAC075] Iron Loss Analysis of a Reactor
This Application Note analyzes the iron loss of a reactor.
-
[JAC101] AL-value Current Characteristics Analysis of a Choke Coil
This note presents the use of a magnetic field analysis to obtain the AL-value current properties of a choke coil.