Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT
This Application Note presents how to use JMAG-RT to obtain the spatial harmonics and current dependency of the thrust and coil inductance, and import them to a circuit/control si…
-
[RTML-047] PMSM/IPM Constant rating 75(kW) 3-phase
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
[JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine
In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT
In this Application Note, after using JMAG-RT to obtain an SR motor’s torque and inductance characteristics, the JMAG-RT model is imported into a circuit/control simulator, voltag…
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[JAC243] Voice Coil Motor Control Simulation Using a Control Simulator and JMAG-RT
In this example, circuit simulation is performed to control the position of a mover by loading a JMAG-RT model for a voice coil motor into a control/circuit simulator.
-
[JAC290] Design Exploration of IPM Motors, Including Evaluating Part Temperature and Stress
In this example, the part temperature and stress are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explored.
-
San-Eisha Ltd.
A power distribution equipment manufacturer committed to establishing stable power supply and creating a comfortable living environment. A company that manufactures highly reliabl…
-
[L-MO-09] Easily Creating Complex Coil Ends Geometry in a Template
The introduction of square wire coils and higher motor speeds no longer allow coil AC losses to be ignored as a loss factor. Coil AC losses are caused by the skin effect and prox…
-
[JAC280] Topology Optimization of Induction Heating Coil
In this example, magnetic field and thermal coupled analysis is run, and using topology optimization, searches are performed for a heating coil that maximizes the power factor and…
-
AISIN CORPORATION（Part l）
We spoke with Ms. Okawa, Associate Officer in charge of the Power Train and Electrification Development of the Powertrain Company, the key figure in technology development and pro…
-
AISIN CORPORATION（Part ll）
Interview of technical experts working on developing the traction system (eAxle) for BEVs (Battery Electric Vehicle).
-
Electrical, Electronics and Information Engineering, Engineering, Nagaoka University of Technology
Value the challenges in developing new technologies, and taking the initiative in motor structure innovations
-
Aiming for Further Improved High Power Density Motor
Masatsugu Takemoto, Okayama University
