Structural
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Analysis of the Electromagnetic NVH of Electrical Machines
Stephan Guenther, AVL Software and Functions GmbH
-
Investigating the Possibility of Improving Performance by Applying CFRP to Outer Rotor Housing
Yoshiyuki Sakashita, PUES Corporation
-
Right First Time Design of e-Drive NVH
Hiroshi Koyama, Romax Technology Japan Limited
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC020] Sound Pressure Analysis of an SPM Motor
This Application Note shows an example of an evaluation of a reactor’s sound pressure, when acquiring electromagnetic force generated by a stator core for a SPM motor and linking …
-
[L-MU-07]Multiphysics Analysis by Linking with Specialized Tools
The mapping function between models with different dimensions in a JMAG multiphysics analysis can also be used when running a coupled analysis with other tools. JMAG makes it poss…
-
[JAC226] Vibration Characteristics Analysis of SPM Motors
In this example, the acceleration is evaluated by obtaining the electromagnetic force generated in the stator core of the SPM motor at multiple rotation speeds and coupling with t…
-
[JAC251] Alternator Vibration Analysis
In this example, the electromagnetic force generated in the stator core of a claw pole alternator is obtained, and acceleration is evaluated with an electromagnetic force - struct…
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
-
[JAC184] Reactor Sound Pressure Analysis taking Magnetostriction into Account
These notes will conduct an analysis of changed vibratory force and show a case study of confirming the impact magnetostriction has on vibration noise.
-
[W-MO-23] Measurement of PM Motor Vibration/Noise and Analysis Modeling
While miniaturization and efficiency optimization are always in demand in motor development, demand is also increasing for the reduction of vibration and noise in recent years. As…
-
[JAC128] Structural Analysis of a Cantilever
In this Application Note, the displacement is obtained for three simple cantilever beam models with different mesh conditions when their eigenmode or a concentrated load is applie…
-
[JAC108] Centrifugal Force Rupture Analysis of a Ring Magnet
This Application Note presents how to obtain the stress distribution of a ring magnet in an SPM motor rotating at high speeds.
-
[JAC087] Iron Loss Analysis of an IPM Motor Including the Effect of Shrink Fitting
This document will compare the results of iron loss accounting for only the size of stress, and iron loss accounting for changes in magnetic flux density over time for each princi…
-
Utilization of JMAG-RT Using Multi-Case Parallel Calculation
Tomoya Ueda, NIDEC CORPORATION
-
Permanent Magnet Motor Vibration Simulation for Compressor Application
Steven Lee, Emerson Climate Technologies (Suzhou) Co.,Ltd
