Thermal
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear
In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.
-
[JAC249] Dielectric Heating Analysis of a High-Frequency Preheater with Parallel Plate Electrodes
In this example, a use case evaluating the influence on the temperature distribution of materials (tablets) with and without auxiliary electrodes is presented.
-
[L-MU-92] JMAG/Particleworks Coupled Motor Cooling Analysis
Motor temperature control is an important issue. Due to temperature rise, demagnetization occurs in PM motor magnets leading to a loss of high efficiency.
-
[L-MU-07]Multiphysics Analysis by Linking with Specialized Tools
The mapping function between models with different dimensions in a JMAG multiphysics analysis can also be used when running a coupled analysis with other tools. JMAG makes it poss…
-
[JAC206] Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis
This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
[JAC133] Thermal Analysis of a Three-phase Transformer
This Application Note presents an example of how to confirm a temperature distribution using the iron and copper losses of a three-phase transformer as heat sources.
-
[JAC100] Surface Heating Analysis of a Steel Plate
This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …
-
[JAC127] Resistance Heating Analysis of Steel
This Application Note presents how to obtain the temperature distribution, temperature variations, and heat flux distribution in a body heated by ohmic heating.
-
[JAC085] High-Frequency Induction Heating Analysis of a Constant Velocity Joint
This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…
-
[JAC123] Thermal Analysis of a Choke Coil
This Application Note shows the use of a thermal analysis to obtain the temperature distribution using the iron losses and copper losses in the choke coil as the heat source.
-
Magnetic Field Analysis of Rectifiers
Tomohisa Yamagishi, Fuji Electric Co.,Ltd.
-
Investigations in Coil Design for Induction Heating Using JMAG and the Optimization Tool HEEDS
Toshiaki Matsumura, AW ENGINEERING CO.,LTD.
-
Design Exploration of Heating Coil Shape by Cooperation of JMAG and HEEDS
Hiroshi Yuki, NTN corporation
-
Shape Optimization of Induction Heating Coil by JMAG – Optimus Cooperation
Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.
