Motor

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT

    This Application Note presents how to use JMAG-RT to obtain the spatial harmonics and current dependency of the thrust and coil inductance, and import them to a circuit/control si…

  2. [JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine

    In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.

  3. [JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT

    In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.

  4. [JAC227] Circuit Control Simulation for Three-Phase Induction Motor

    In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.

  5. [JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT

    In this Application Note, after using JMAG-RT to obtain an SR motor’s torque and inductance characteristics, the JMAG-RT model is imported into a circuit/control simulator, voltag…

  6. [JAC239] Fault Analysis in an IPM Motor

    In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…

  7. [JAC243] Voice Coil Motor Control Simulation Using a Control Simulator and JMAG-RT

    In this example, circuit simulation is performed to control the position of a mover by loading a JMAG-RT model for a voice coil motor into a control/circuit simulator.

  8. San-Eisha Ltd.

    San-Eisha Ltd.

    A power distribution equipment manufacturer committed to establishing stable power supply and creating a comfortable living environment. A company that manufactures highly reliabl…

  9. [L-MO-09] Easily Creating Complex Coil Ends Geometry in a Template

    The introduction of square wire coils and higher motor speeds no longer allow coil AC losses to be ignored as a loss factor. Coil AC losses are caused by the skin effect and prox…

  10. AISIN CORPORATION

    AISIN CORPORATION(Part l)

    We spoke with Ms. Okawa, Associate Officer in charge of the Power Train and Electrification Development of the Powertrain Company, the key figure in technology development and pro…

  11. AISIN CORPORATION

    AISIN CORPORATION(Part ll)

    Interview of technical experts working on developing the traction system (eAxle) for BEVs (Battery Electric Vehicle).

  12. Electrical, Electronics and Information Engineering, Engineering, Nagaoka University of Technology

    Value the challenges in developing new technologies, and taking the initiative in motor structure innovations

  13. okayamauniv

    Aiming for Further Improved High Power Density Motor

    Masatsugu Takemoto, Okayama University

  14. An Introduction of Cloud Computing Application for Motor Design Speed Improvement

    Kensuke Sasaki, Nissan Motor Co., Ltd.

  15. Tamagawa Seiki Co.,Ltd.

    Design of a High-Density and High-Output Motor Using Optimization Analysis by GA

    Koji Kokue, Tamagawa Seiki Co.,Ltd.

  16. Ritsumeikan University

    Automatic Design System for Permanent Magnet Synchronous Motors Using Deep Generative Model

    Yuki Shimizu, Ritsumeikan University

Search Filter

  • All Categories