Vector Control Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC299] Inverter Changeover Control for an Open-end Winding Motor (Wound-Field Synchronous Motor)
This case study runs a circuit simulation of an open-end winding motor drive system that switches from using a single inverter to dual inverters during operation in order to mitig…
-
[L-MB-31] Monitoring Internal Condition of the Motor Using JMAG-RT Model
Quietness and safety are required from a motor as equipment such as electric vehicles and robots that utilize motors have been in great demand. For this reason, motor control is r…
-
[JAC295] Inverter Changeover Control for an Open-end Winding Motor
This case study runs a circuit simulation of an open-end winding motor drive system that switches from using a single inverter to dual inverters during operation in order to mitig…
-
[L-MB-30] Accurately Identifying Motor Characteristics During Control with JMAG-RT
In general, the characteristics of motor models used in control circuit simulation of a motor drive system are often assumed to be constant when the motor is in drive mode.
-
[JAC214] Monitoring the Radial Force Acting on the Teeth of IPM Motors Using Circuit Control Simulation
In this example, an IPM motor as a JMAG-RT model is captured in a control/circuit simulator, and radial forces acting on the teeth during motor driving is monitored while changing…
-
[JAC037] Vector Control Analysis of an IPM Motor Using Control Simulator and the JMAG-RT
The purpose of this Application Note is to demonstrate how to import a JMAG-RT model to a control/circuit simulator after using the JMAG-RT to obtain the inductance spatial harmon…
-
[JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine
In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[W-MB-167] Motor Plant Model Considering AC Loss for Control Calibration
Control parameter calibrations on Model-In-the-Loop Simulation (MILS) with Finite Element Analysis (FEA) based motor models is expected to be a standard procedure in the Model-Bas…
-
[W-MB-157] Evaluation of the Effect of Resolver Eccentricity on PM Motor Torque Ripple Control
VR-type resolvers are widely used as angle sensors to control the rotation of traction motors for electric vehicles and hybrid vehicles.
-
[W-MB-151] Accuracy of Motor Plant Model Required for Control Calibration
Control calibration is time-consuming work because it is carried out for every operating point using the actual machine.
-
[W-MB-155] Accuracy of 6-Phase Motor Plant Models for Detecting Faults at Disconnections
Multiphase motors have become widely used, and a fail-safe function can be realized by providing a system with redundancy.
-
[W-MB-153] Accuracy and Speed Verification of Motor Plant Models Accounting for Spatial Harmonics
This document uses JMAG-RT, which is a type of plant model, to show the relationship between the resolution and accuracy of each axis (mechanical angle, current amplitude, and cur…
-
Model Based Development of Dual Inverter with JMAG-RT Model and Motor HILS
Takahiro Yamada, MIRISE Technologies Corporation
