Vector Control Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[L-MB-33]Supporting Motor Drive Development with a JMAG-MATLAB/Simulink Coupling
Together with Mathworks, the company that develops MATLAB/Simulink (hereafter referred to as "Simulink"), JMAG strongly supports model-based development (hereafter referred to as …
-
[W-MO-85] Efficiency Map Evaluations Considering Harmonic Loss
In this paper, we propose a method that combines two approaches to calculate the efficiency at various operating points considering the influence of time harmonics and other effec…
-
[W-MB-102] Motor Efficiency Map Evaluation for Model-Based Development (MBD) Using FEA Simulation
In MBD, it is necessary to evaluate devices characteristics without having to wait for the manufacturing of a prototype.
-
[JAC230] 6-Phase SPM Motor Inverter Fault Simulation
In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.
-
[JAC231] Vector Control Simulation of a Synchronous Reluctance Motor
In this example, circuit simulation is carried out simulating the control of current and speed by loading a JMAG-RT model for a SynRM into a control/circuit simulator. In addition…
-
Motor Drive Verification Using HILS Implemented with JMAG-RT Models
Masamichi Inoue, Mitsubishi Electric Corporation
-
Model Based Development of Dual Inverter with JMAG-RT Model and Motor HILS
Takahiro Yamada, MIRISE Technologies Corporation
-
[W-MB-153] Accuracy and Speed Verification of Motor Plant Models Accounting for Spatial Harmonics
This document uses JMAG-RT, which is a type of plant model, to show the relationship between the resolution and accuracy of each axis (mechanical angle, current amplitude, and cur…
-
[W-MB-155] Accuracy of 6-Phase Motor Plant Models for Detecting Faults at Disconnections
Multiphase motors have become widely used, and a fail-safe function can be realized by providing a system with redundancy.
-
[W-MB-151] Accuracy of Motor Plant Model Required for Control Calibration
Control calibration is time-consuming work because it is carried out for every operating point using the actual machine.
-
[W-MB-157] Evaluation of the Effect of Resolver Eccentricity on PM Motor Torque Ripple Control
VR-type resolvers are widely used as angle sensors to control the rotation of traction motors for electric vehicles and hybrid vehicles.
-
[W-MB-167] Motor Plant Model Considering AC Loss for Control Calibration
Control parameter calibrations on Model-In-the-Loop Simulation (MILS) with Finite Element Analysis (FEA) based motor models is expected to be a standard procedure in the Model-Bas…
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine
In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.
