MBD

Sort condition
Newest first
Oldest first
Views
  1. [JFT015] Procedure for Two Way Coupled Analysis with JMAG and STAR-CCM+ Taking Thermal Fluid into Account (Ver17.0 and After)

    This document presents the procedure for two way coupled analysis considering thermal fluid by using JMAG and STAR-CCM+.

  2. [JFT012] JMAG-RT Model Generation of Wound-Field Synchronous Motor

    This document shows how to generate a JMAG-RT model of a wound-field synchronous motor and how to execute control simulation using a JMAG-RT model in MATLAB/Simulink.

  3. [JFT004] Two-way coupled analysis function with JMAG and STAR-CCM+

    This document contains sample data and operation procedures for learning about external solver coupling conditions and procedures for two-way coupled analysis with STAR-CCM+.

  4. 243 – Voice Coil Motor Control Simulation Using a Control Simulator and JMAG-RT

    In this example, circuit simulation is performed to control the position of a mover by loading a JMAG-RT model for a voice coil motor into a control/circuit simulator.

  5. 239 – Fault Analysis in an IPM Motor

    In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…

  6. 245 – Injector Control and Eddy Current Effects

    In this example, an example of evaluating the difference in responsiveness of an injector when eddy currents are taken into account or not is presented.

  7. 231 – Vector Control Simulation of a Synchronous Reluctance Motor

    In this example, circuit simulation is carried out simulating the control of current and speed by loading a JMAG-RT model for a SynRM into a control/circuit simulator. In addition…

  8. 230 – 6-Phase SPM Motor Inverter Fault Simulation

    In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.

  9. 227 – Circuit Control Simulation for Three-Phase Induction Motor

    In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.

  10. 216 – Simulation of a Claw-Pole Type Alternator Using Control Simulator and JMAG-RT

    In this example, the output voltage and field current of a claw-pole type alternator is checked when the rotor speed is changed.

  11. 213 – Circuit/Control Simulation of a Wound-Field Synchronous Motor

    In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…

  12. 206 – Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis

    This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…

  13. 166 – Line Start Simulation of an Induction Machine Using a Control Simulator and the JMAG-RT

    This Application Note explains how to use the JMAG-RT to create a JMAG-RT model of an induction motor, import it to a circuit/control simulator, and run an induction motor line st…

  14. [RTML-046] ALTERNATOR_01

    Type: ALTERNATOR | Stator(Outside Diameter): 140(mm) | Height: 45(mm) | Voltage/Current: DC200(V) | Rotor/Mover: WF

  15. [RTML-045] LSM_01

    Type: LSM | Max Power: 2 | Voltage/Current: DC400(V) | Rotor/Mover: SPM

  16. [RTML-044] SRM_01

    Type: WFSM | Max Power: 2 | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF

Search Filter

  • All Categories