Optimization
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[W-OP-166] Sensitivity Study of Configuration of Large Scale Multi-Objective Optimization of a PMSM
The feasible solution space of large scale multi-objective optimization schemes is sensitive to the configuration (population size, objectives, constraints, and design variables).
-
[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation
In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…
-
Vibration Prediction of Permanent Magnet Synchronous Motors by Aid of JMAG
Toru Mizota, YANMAR HOLDINGS CO., LTD.
-
Optimal Design of Instantaneous High-output Motor for Basketball Robots
Yoshihiro Okumatsu, TOYOTA MOTOR CORPRATION
-
Performance Analysis Method of IPM Motor for EV Using Electromagnetic Simulation(JMAG)
Yoshihisa Kubota, Honda R&D Co.,Ltd
-
Calculation Cost Reduction Method in Multi-Objective Optimization Using Machine Learning: Case Study on Actuator Development
Tomohiro Kuroda, AISIN CORPORATION
-
DOE-based Optimization of Electrical Machines
Stephan Guenther, IAV GmbH
-
Analysis of Gas Proportional Solenoid Valve Using JMAG
Yuichi Mochizuki, PURPOSE CO.,LTD.
-
Relationship of Parallel Number of Analyzes to Analysis Time with Outer Rotor Type Fan Motor
Tsukasa Asari, DAIKIN INDUSTRIES,LTD
-
Topology Optimization of Electric Machines for E-mobility Applications
Bharadwaj Raghuraman/Shafigh Nategh, Volvo Car Corporation
-
A Study of Improving Demagnetization Resistance Performance by JMAG Topology Optimization
Shogo Shintani, Toshiba Corporation
-
Application of Automation of Design Utilizing Optimization to Traction Motor
Tomoya Ueda, NIDEC CORPORATION
-
Optimization (multi-objective, multi-physical) and Verification of E-Motor Design Using Real Test Bench Data
Tim Schwartz / Sebastian Igel, Great Wall Motor Austria Research & Development GmbH
-
[JAC268] SPM Motor Teeth Geometry Topology Optimization
In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…
-
[JAC233] Induction Heating Coil Optimization
In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.
-
[W-OP-96] Necessity of GA for Multi-Objective Optimization of Drive Motor
In this paper, the multi-objective optimization calculation has 12 design variables (8 geometric variables, 4 circuit variables) with 6 objective functions (maximize torque, minim…
