Thermal
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC206] Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis
This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
[JAC133] Thermal Analysis of a Three-phase Transformer
This Application Note presents an example of how to confirm a temperature distribution using the iron and copper losses of a three-phase transformer as heat sources.
-
[JAC130] Thermal Conductivity Analysis of Basic Geometry
In this Application Note, the analysis accuracy is investigated by comparing the temperatures obtained through analysis in each part with theoretical values.
-
[JAC127] Resistance Heating Analysis of Steel
This Application Note presents how to obtain the temperature distribution, temperature variations, and heat flux distribution in a body heated by ohmic heating.
-
[JAC085] High-Frequency Induction Heating Analysis of a Constant Velocity Joint
This Application Note shows how to run an analysis of the elevated temperature process by using the geometry of a coil to evaluate whether or not the target temperature conditions…
-
[JAC123] Thermal Analysis of a Choke Coil
This Application Note shows the use of a thermal analysis to obtain the temperature distribution using the iron losses and copper losses in the choke coil as the heat source.
-
Magnetic Field Analysis of Rectifiers
Tomohisa Yamagishi, Fuji Electric Co.,Ltd.
-
Investigations in Coil Design for Induction Heating Using JMAG and the Optimization Tool HEEDS
Toshiaki Matsumura, AW ENGINEERING CO.,LTD.
-
Design Exploration of Heating Coil Shape by Cooperation of JMAG and HEEDS
Hiroshi Yuki, NTN corporation
-
Shape Optimization of Induction Heating Coil by JMAG – Optimus Cooperation
Ayaka Nakata, KOYO THERMO SYSTEMS CO.,LTD.
-
Introduction and Application of JMAG on Induction Heating
Tomohiro Adachi, DAI-ICHI KIDEN CO., LTD.
-
Introduction of Coupled Analysis Case Giving New Added Value to Electromagnetic Field Analysis: – Electromagnetic Field – Fluid, Electromagnet…
Hiroshi Kawakami, Prometech Software, Inc.
-
[JAC249] Dielectric Heating Analysis of a High-Frequency Preheater with Parallel Plate Electrodes
In this example, a use case evaluating the influence on the temperature distribution of materials (tablets) with and without auxiliary electrodes is presented.
-
Detailed Evaluation of High-frequency Transformers/Reactors
Takayuki Nishio, JSOL Corp.
