Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[L-MO-77] Motor Concept Design with JMAG-Express and JMAG-RT Viewer
Within upstream system designs in a development process, elements that satisfy motor requirements are all roughly determined. This includes the rotor type, the number of poles, th…
-
[L-MO-90] Detailed Coil Modelling for Motors
Motors require higher power densities and lowered heights. This calls for high-fidelity simulations that make it possible to view the effects of the detailed geometry of a coil. I…
-
[W-MA-70] Mesh Modeling for Coil AC Loss Analysis
In this report, coil AC loss analysis is examined from the perspective of mesh modeling.
-
[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets
In this example, analysis is performed while varying the temperature of magnetized magnets, and then the influence on the torque waveform and magnetic flux density distribution is…
-
[JAC226] Vibration Characteristics Analysis of SPM Motors
In this example, the acceleration is evaluated by obtaining the electromagnetic force generated in the stator core of the SPM motor at multiple rotation speeds and coupling with t…
-
[JAC237] AC Loss Analysis of an IPM Motor
In this example, we introduce the case study that evaluates AC losses in coils of an IPM motor.
-
[W-MB-65] The Necessity of JMAG-RT 3D Models
In this paper, the necessity of 3D FEA models in plant model generation will be discussed.
-
[JAC229] Analysis of the Effect of PWM on the Iron Loss of an Induction Motor
In this example, we introduce a case study to obtain the iron losses of the induction motor that accounts for the PWM input.
-
[JAC194] Analysis of High-Speed Rotation Motors Accounting for Eddy Current
Here we discuss the steps for accounting for eddy current loss occurring in the magnetic steel sheets during a magnetic field analysis, and then analyze the effects on torque.
-
[JAC191] Torque Analysis of Three-Phase Induction Motors Accounting for the Skew Using the Multi-slice Method
In this document, the multi-slice method is used to compare torque waveforms of a cage three-phase induction motor with and without skew, and is then used to verify the effects of…
-
[JAC188] Thermal Demagnetization Analysis of IPM Motors Accounting for Coercive Force Distribution of Magnets
This example presents whether or not the demagnetization region can be smaller by assigning distribution to the coercive force of permanent magnets.
-
[JAC180] Analysis of SR Motor Dynamic Characteristics
This example presents how to carry out an analysis with different switch timings to evaluate torque and current in SR motors.
-
[JAC179] Analysis of SR Motor Static Characteristics
This example presents an evaluation for each rotor position of the effect on flux linkage (shown as I-Psi characteristics below) when excitation current is changed.
-
[JAC178] Analysis of SR Motor I-Psi Characteristics
This example presents an evaluation of flux linkage, inductance and torque for each rotor position when the flowing current value is changed.
-
[JAC177] Torque Characteristic Analysis of a Three Phase Induction Motor
This Application Note explains how to obtain the torque characteristics in an induction motor when the current amplitude has been changed in a specific slip.
-
[JAC173] Basic Characteristic Analysis of an IPM Motor
This Application Note demonstrates an analysis in which an IPM motor's cogging torque, torque, magnetic flux density distribution, and iron loss in the stator core are obtained.
