TR

Transient Magnetic (3D)

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC089] Stiffness Torque Analysis of a PM Stepper Motor

    This Application Note describes how the stiffness torque at 0.5 A of current can be calculated for a PM stepper motor.

  2. [JAC094] Analysis of Detent Torque of a PM Stepper Motor

    This Application Note describes how the detent torque can be calculated for a PM stepper motor.

  3. [JAC080] Cogging Torque Analysis of an SPM Motor with Skewed Magnetization

    This Application Note presents the use of a magnetic field analysis to obtain the flux density distribution, cogging torque, and induced voltage of an SPM motor that has skewed ma…

  4. [JAC099] Superimposed Direct Current Characteristics Analysis of a High Current Reactor

    This Application Note presents how to obtain a high-current reactor’s superimposed direct current characteristics when the gap length is varied.

  5. [JAC129] Analysis of a PM Stepper Motor Accounting for Magnetization

    In this analysis, a magnetization device model is created and a magnet is magnetized. The magnetization distribution and surface magnetic flux density of the magnetized magnet, an…

  6. [JAC054] Analysis of the Cogging Force of a Moving Coil Linear Motor

    This Analysis Note explains how to obtain the magnetic flux density distribution and cogging in a moving coil linear motor with skew applied to its magnets.

  7. [JAC066] Operating Time Analysis of an Injector

    This Application Note explains how to apply direct current voltage to a solenoid injector and obtain its response characteristics by accounting for effects from eddy currents.

  8. [JAC065] Static Thrust Analysis of a Voice Coil Motor

    This Application Note explains how to obtain the current characteristics and the translation position characteristics of the static thrust in a voice coil motor, which is a type o…

  9. Nissan’s EV Motor Development Strategy and History: Vison of Motor Development Strengthening with JMAG

    Shunji Oki, Nissan Motor Co., Ltd.

  10. Current Challenges and Future Solutions in Traction Motor Design for Electric Vehicles

    Bernd Cebulski, IAV GmbH

  11. Loss Distribution Analysis for 4-pole air Cooled Turbine Generator Using 3D Finite Element Method

    Hiromu Kamiyama, TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION

  12. Magnetic Field Analysis of Rectifiers

    Tomohisa Yamagishi, Fuji Electric Co.,Ltd.

  13. The Role of JMAG on Powertrain Development

    Albert Li, Gogoro Inc.

  14. Utilization of JMAG-RT Using Multi-Case Parallel Calculation

    Tomoya Ueda, NIDEC CORPORATION

  15. Development of Measurement Method of Three-dimensional Demagnetization Distribution in Permanent Magnets for Motors

    Shintaro Araki, Technology Research Association of Magnetic Materials for High-Efficiency Motors (MagHEM)

  16. 6 kW Axial Flux Motor Based on Soft Magnetic Composites for Hand Held Power Tools

    Cristofaro Pompermaier, Husqvarna Group

Search Filter

  • All Categories